|  Transceiver module, high speed, FM radio, usable range to 200 m external, 50
m in building, data rates up to 160 kbps, SAW controlled 10 mW FM transmitter
double conversion FM superhet receiver, SAW front end filter and full screcning.
For PDA's, organizers and laptops, handheld terminals,
EPOS equipment, barcode scanners, belt clip printers, data loggers, audience
response systems, in building environmental monitoring and control, high end
security and fire alarms, restaurant ordering systems, vehicle data up/down
load. F(RF) =433.92 MHz, Pout (Tx) =+11 dBm, initial Fr Acc =±50 kHz,
overal Fr Acc =±100 kHz, FM Dev =30 kHz, BW (mod) =DC-32 kHz & DC-80
kHz (160 kbps), Mod distortion
Rx Sens =-101...-90 dBm, BW(IF) =500 kHz, -10 to +55°C - 10953 Transceiver
(integrated FSK T/R module), internal VCO creates module LO, prescaler output
begins PLL, Shottky diode multiplier technology minimizes phase noise, for FSK
radios w/data rates up through 45 Mb/s. Rx (F=37-40 GHz, F (IF)=1.575 GHz, SS
Conv Gn=30 dB, NF15 dB, Tx to Rx spacing=1260 MHz for
ETSI; 700 MHz for FCC, F (Tx IF)=2.835 GHz for ETSI, 2.275 GHz for FCC, P (Tx
IF)=+6 dBm, prescaler output frequency =VCO divided by 4, prescaler output level
=-10...0 dBm, prescaler output harmonics =-20 dBm, LO frequency range = LO = VCOx9), -30 to 70°C - 9265 Transceiver, OEM
design, best sensitivity in the industry for low cost and extended transmission
range, low power consumption, suitable for battery powered applications, small
size, easy to integrate, no knowledge of RF necessary, simple networking protocol,
standard serial digital interface, interfaces with any microcontroller, reliable
data transfer performance, choice of on-board or external antennas, FCC-approved
to make no further licensing required. The radios integrate quickly and seamlessly
into any new or existing design. The radio is perfect for application in supervisory
control and data acquisition (SCADA), remote meter reading, home automation,
security, instrument monitoring, point of sale systems (POS) and myriad other
applications. F=2.4000-2.4835 GHz,  FHSS, frequency control: direct FM, network topology: point-multipoint and
point - to point multi-drop transparent networking, channel capacity: 65000
network identifiers share 25 hop channels, serial data interface: asynchronous
serial CMOS signals, I/O data rate = 2400-57600 bps (software selectable), RF
baud rate =20000 bps, data throughput =19200 bps, Rx Sens =-101dBm, range =300-750
ft (indoor), 3mi (outdoor, with depole), >12 mi (outdoor, with gain antenna),
supply voltage =5VDC±0.3V@I (Tx/Rx/power down)=240/60/0.01 mA, size =4.06x6.86x0.89
cm, weight =24 g, 0 to +70oC, -40 to +85oC - 9264 Transceiver, OEM design, best
sensitivity in the industry for low cost and extended transmission range, low
power consumption, suitable for battery powered applications, small size, easy
to integrate, no knowledge of RF necessary, simple networking protocol, standard
serial digital interface, interfaces with any microcontroller, reliable data
transfer performance, choice of on-board or external antennas, FCC-approved
to make no further licensing required. The radios integrate quickly and seamlessly
into any new or existing design. The radio is perfect for application in supervisory
control and data acquisition (SCADA), remote meter reading, home automation,
security, instrument monitoring, point of sale systems (POS) and myriad other
applications. F=2.4000-2.4835 GHz, FHSS, frequency control: direct FM, network
topology: point-multipoint and point - to point multi-drop transparent networking,
|
